RY20 Relay normally open two normally closed two input types: N type: common cathode (negative electrode is common) P type: common anode (positive electrode is common) Product features: input control terminal plus a short-circuit protection diodes, to avoid the host damage to the machine. Relay (IDEC), contact allowed by current, durability. With LED operation indicator. Outputs: different loads use different protection, such as RC, diode, fuse and so on. Relay base, and comes standard with a trip lever fixed, easy installation and removal of the relay. Terminals, modular stent using Taiwan Progressive Alliance (DECA), stable and reliable quality. There UL, VDE certification, in line with ROHS. For CNC machine tools, control cabinet, PLC output. Technical parameters: input (coil) Rated voltage DC12,24V; AC110,220V etc. over 70% of the minimum starting voltage release voltage 10% less start-up time 15ms release time of 10ms or less output (contacts) contact structure 2NC-2NO / 8A DPDT contacts allow current contact allows minimum applicable load voltage 250VAC 30VDC 5VDC / 100mA electrical life of more than 20 million times (AC load) above 100,000 times (DC load) Mechanical life of more than 30 million times (AC coil) over 50 million times (DC coil) General Data in each power of about 0.7W Ambient temperature -40- + 70 ℃ (no icing) Ambient humidity 5-85% RH (non-condensing) terminal wire gauge 0.2 ~ 2.5mm2 (26 ~ 12AWG) action showed Note: Can be made by any other digit http://www.hongantr.com/